◊ Space saving design only 1.4” (35.6mm) deep
◊ Occupies less than 2.5 x 1.1 inches of front panel space
◊ High contrast LCD
◊ 3 1/2 digits with 0.39” LCD
◊ Snap-In bezel eliminates the need for mounting hardware
◊ User Selectable Decimal Points
◊ Process input (4 to 20mA) adder board with multi-turn SPAN (GAIN) and ZERO (OFFSET) adjustments
◊ Loop powered
SPECIFICATIONS:
Display:
Digits:
3 ½ digits (±1999 counts)
Type:
0.39” (10mm) high contrast reflective LCD
Polarity:
automatic, “-” displayed.
Decimal Points:
3 position, user selectable
Overrange:
three lower order digits blank for inputs >1999 & <-1999
Inputs:
Ranges:
4- 20mA
Configuration:
bipolar, differential
Protection:
30mA max
Loop Burden:
300Ω nominal @ 20 mA DC (loop powered)
Performance:
Accuracy:
±(0.1% +1 counts) typical;
±(0.2% + 2 counts) maximum
Conversion Rate:
3 per second
Normal Mode Rejection:
>30 dB @ 60 Hz
Adjustments:
automatic
Warmup:
10 minutes typical
Temperature Coeff.:
±100 ppm per °C typical
Environment:
Operating Range:
0 to 50 °C
Storage Range:
-10 to 60 °C
Power Supply:
powered by the 4-20mA current loop
Mounting:
LCD:
snap-in bezel mount
Process Board:
plugs onto DPM pins, adds approx. 0.6”(16mm) to depth
Connection:
screw terminals on process board
Ordering Information:
DK190
4 to 20mA Loop Powered
PW2-24
Regulated 120V AC to 24V DC Adaptor
PW1-0
24V AC to adjustable DC output
CPW1.5
24V AC to adjustable DC output
CVC
Calibrator
To order, click link below to enter Digi-Key's website, enter the DK part number into the "C-Ton Industries Part Search".
If you are unsure of what you want, there is also a product training module or use Digi-Key's Live Online Chat.
