LCD DIGITAL PANEL METERS
DK710 SERIES
Large Snap-in 4 1/2 Digit LCD Display
Features and Benefits: | ||
◊ Low-cost, high-performance replacement for many OEM DPMs ◊ Mounting: Snap-in bezel mount eliminates mounting hardware ◊ Low power ◊ Space-saving design: only 1" (25 mm) deep ◊ Occupies less than 2.5 X 1.1 inches of front panel space ◊ 4 1/2 digits with high-contrast LCD |
||
Specifications: |
||
---|---|---|
Display: | Digits: |
4 ½ digits (±19999 counts) |
Type: |
0.5" (13mm) 7 segment LCD | |
Polarity: | automatic, “-” displayed | |
Decimal Points: |
4 position, user-selectable | |
Overrange: |
four lower order digits blank for inputs >19999 & <-19999 | |
Hold: | standard | |
Inputs: | Ranges: |
±200.0 mV, ±2.000 V, ±20.00 VDC |
Configuration: |
differential | |
Protection: |
±10 VDC on 200 mV ; ±100 VDC on @ 2 V ; ±350 VDC on 20 V range | |
Impedance: |
>100 MΩ on ± 200 mV ; (>1 MΩ on 2V & 20V range) | |
Bias Current: | 10 pA typical | |
Performance: | Accuracy: |
±(0.06% fs + 1 count) maximum |
Conversion Rate: |
2 per second | |
Normal Mode Rejection: |
>30 dB @ 60 Hz | |
Common Mode Range: |
±1 VDC (5 V powered) | |
Common Mode Rej.: |
>86 dB | |
Zero Adjustment: |
automatic | |
Warmup: |
10 minutes typical | |
Temperature Coefficient: | ±50 ppm per °C typical ±100 ppm max for 200 mV range ±100 ppm per °C typical ±200 ppm max for 2V & 20V ranges |
|
Environment: | Operating Range: |
0 to 50 °C |
Storage Range: |
-10 to 70 °C | |
Power Supply: | 5V powered: | +5 VDC (4.65 - 5.35) at 2.6 mA |
Mounting: | snap-in bezel mount | |
Connection: | 13 pins, 0.025" square on 0.1" centers |
Ordering Information: | |
PART NUMBER | INFO |
DK702 |
NO BACKLIGHT LCD, RANGE: 200mV, POWER: +5VDC |
DK703 |
NO BACKLIGHT LCD, RANGE: 2V, POWER: +5VDC |
DK704 |
NO BACKLIGHT LCD, RANGE: 200mV, POWER: 9V |
DK705 |
NO BACKLIGHT LCD, RANGE: 2V, POWER: 9V |
DK710 |
NO BACKLIGHT LCD, RANGE: 200mV, POWER: +5VDC |
DK711 |
NO BACKLIGHT LCD, RANGE: 2V, POWER: +5VDC |
DK712 |
NO BACKLIGHT LCD, RANGE: 20V, POWER: +5VDC |
J4C13 |
13 pin Connector / Wire Assembly, RED on pin #1, BLACK on pin #2 |
PW2-5 |
DC Power Supply, 120 AC Input, 5 VDC @ 300mA Output |
PW2-12 |
DC Power Supply, 120 AC Input, 12 VDC @ 200mA Output |